| Application |
| Measuring element | ceramic-capacitive pressure measuring | cell |
| Media | group 2 fluids according to the Pressure Equipment Directive (PED) |
| Conditionally suitable for | | group 1 fluids on request |
| Medium temperature [°C] | | | -25...80 |
| Pressure rating | | 75 bar | 1087 psi | 7.5 MPa |
| Min. bursting pressure | | 150 bar | 2175 psi | 15 MPa |
| Vacuum resistance | [mbar] | | | -1000 |
| Type of pressure | | | | relative pressure |
| Electrical data |
| Operating voltage [V] | 18...30 DC; (according to EN 50178 SELV/PELV) |
| Current consumption | [mA] | | | < 35 |
| Min. insulation resistance [MΩ] | | 100; (500 V DC) |
| Protection class | | | III |
| Reverse polarity protection | | yes |
| Power-on delay time | [s] | | 0.3 |
| Integrated watchdog | | yes |
| Inputs / outputs |
| Number of inputs and outputs | | Number of digital outputs: 1; Number of analog outputs: 1 |
 ifmefector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We
reserve the right to make technical alterations without prior
notice. — EN-US — PN3594-01 — 24.05.2016 — |
|
| PN3594 |
| Pressure sensor with display |
| PN-010-REG14-MFRKG/US/ /V |
| Outputs |
| Total number of outputs | 2 | |
| Output signal | switching signal; analog signal; IO-Link; (configurable) |
| Electrical design | | PNP | |
| Number of digital outputs | | 1 | |
| Output function | normally open / closed; (configurable) | |
Max. voltage drop switching
output DC | [V] | | 2.5 |
Permanent current rating of
switching output DC | [mA] | | 150; (200 (...60 °C) 250 (...40 °C)) |
| Switching frequency DC | [Hz] | | < 170 |
| Number of analog outputs | | 1 |
| Analog current output | [mA] | | 4...20; (0 bar = 4 mA; 10 bar = 20 mA) |
| Max. load | [Ω] | | 500 |
| Analog voltage output | [V] | | 0...10; (0 bar = 0 V; 10 bar = 10 V) |
| Min. load resistance | [Ω] | | 2000 |
| Short-circuit protection | | yes |
Type of short-circuit
protection | | yes (non-latching) |
| Overload | protection | | | yes | |
| Measuring/setting range |
| Measuring range | | -1...10 bar | -14.5...145 psi | -0.1...1 MPa |
| Set point SP | | -0.9...10 bar | -13.5...145 psi | -0.09...1 MPa |
| Reset point rP | | -0.95...9.95 bar | -14...144.5 psi | > -0.095 MPa |
| Insteps of | | 0.05 bar | 0.5 psi | 0.005 MPa |
| Accuracy / deviations |
| Switch point accuracy | < ± 0,5 | |
| [% of the span] | | |
| Repeatability | [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K) |
Characteristics deviation
[% of the span] | | < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight
Line; LS = limit value setting) |
| | |
Hysteresis deviation
[% of the span] | | < ± 0,25 |
Long-term stability
[% of the span] | | < ± 0,05; (per 6 months) |
| | |
Temperature coefficient zero
point
[% of the span / 10 K] | | < ± 0,2; (-0...80 °C) |
Temperature coefficient span
[% of the span / 10 K] | | < ± 0,2; (-0...80 °C) |
 ifmefector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We
reserve the right to make technical alterations without prior
notice. — EN-US — PN3594-01 — 24.05.2016 — |
|
| PN3594 |
| Pressure sensor with display |
| PN-010-REG14-MFRKG/US/ /V |
| Reaction times |
| Response time | [ms] | | < 3 | |
Delay time programmable dS,
dr | [s] | | 0...50 |
Damping for the switching
output dAP | [s] | | 0...4 |
Damping for the analog
output dAA | [s] | | 0...4 |
Max. response time analog
output | [ms] | | 3 |
| Software / programming |
| Parameter setting options | hysteresis / window; normally open / closed; switch-on/
switch-off delay; Damping; Display unit; current/voltage output |
| Interfaces |
| Communication interface | IO-Link | |
| Transmission type | COM2 |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| IO-Link device ID | 431 d / 00 01 afh |
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device
Diagnosis |
| SIO mode | | yes |
| Required master port class | | A |
| Process data analogue | | 1 |
| Process data binary | | 1 |
| Min. process cycle time [ms] | | 2.3 |
| Operating conditions |
| Ambient temperature [°C] | -25...80 | |
Storage temperature
Protection | [°C] | | -40...100
IP 65; IP 67 |
| Tests / approvals |
| EMC | | DIN EN 61000-6-2 | |
| DIN EN 61000-6-3 | |
| Shock resistance | | DIN EN 60068-2-27 | 50 g (11 ms) |
| Vibration resistance | | DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
| MTTF [years] | | 181 |
| UL approval | | UL approval number | J004 |
| Pressure equipment directive | | sound engineering practice |
 ifmefector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We
reserve the right to make technical alterations without prior
notice. — EN-US — PN3594-01 — 24.05.2016 — |
|
| PN3594 |
| Pressure sensor with display |
| PN-010-REG14-MFRKG/US/ /V |
| Mechanical data |
| Weight | [g] | | 281.5 | |
| Material | | | stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC |
| Materials (wetted parts) | | | stainless steel (1.4404 / 316L); Al2O3 (ceramics); FKM | |
| Min. pressure cycles | | 100 million |
| Tightening torque | [Nm] | | 25...35; (recommended tightening torque;
Depends on lubrication, sealand pressure rating) |
| Process connection | | | threaded connection G 1/4 external thread (DIN EN ISO 1179-2);
Internal threadM5 |
| Process connection sealing | | | FKM (to DIN 3869) |
| Restrictor element integrated | | no (can be retrofitted) |
| Displays / operating elements |
| Display unit | 3 x LED, green (bar, psi, MPa) |
| Display | Switching status | 1 x LED, yellow |
| Measured values | alphanumeric display, red/green 4-digit |
| Remarks |
| Pack quantity | 1 pcs. | |
| Electrical connection |
